Возврат к шагу #3
Отредактированно kuljinder kaur dhami -
Правка одобрена автор kuljinder kaur dhami
- До
- После
- Без изменений
Шаг Линий
+ | [* black] Using your finger flip up the black tab of the ribbon cable connector shown with the red rectangular box in picture one. Then gently remove the ribbon. Don't use screwdrivers to open ribbon connectors because that can cause damage to the pins. Afterwards remove the ribbon from underneath the metal part circled in red in first picture. |
---|---|
+ | [* black] Remove the tray lid from the top gently as shown in image three. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено
Изображение 3
Нет предыдущего изображения
Добавлено