Перейти к основному содержанию

Возврат к шагу #3

Отредактированно Marcos Arguello-Gonzalez -

Правка одобрена автор Marcos Arguello-Gonzalez

До
После
Без изменений

Шаг Линий

-[* black] Using your finger flip up the black tab of the ribbon cable connector shown with the red rectangular box in picture one. Then gently remove the ribbon. Don't use screwdrivers to open ribbon connectors because that can cause damage to the pins. Afterwards remove the ribbon from underneath the metal part circled in red in first picture.
-[* black] Remove the tray lid from the top gently as shown in image three.
+[* black] Using your finger flip up the black tab of the ribbon cable connector (this is shown by rectangular box in picture one).
+[* black] Gently remove the ribbon. (Don't use screwdrivers to open ribbon connectors because that can cause damage to the pins).
+[* black] Now remove the ribbon from underneath the metal circled in red.
+[* black] Remove the lid of the tray from the top as shown in image three.