Перейти к основному содержанию

Возврат к шагу #3

Отредактированно Justin Ogihara -

Правка одобрена автор Justin Ogihara

До
После
Без изменений

Шаг Линий

-[* black] Using your finger flip up the black tab of the ribbon cable connector (this is shown by rectangular box in picture one).
+[* red] Using your finger flip up the black tab of the ribbon cable connector (this is shown by rectangular box in picture one).
[* black] Gently remove the ribbon. (Don't use screwdrivers to open ribbon connectors because that can cause damage to the pins).
-[* black] Now remove the ribbon from underneath the metal circled in red.
+[* red] Now remove the ribbon from underneath the metal circled in red.
[* black] Remove the lid of the tray from the top as shown in image three.