Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Gently slide a plastic card or other thin pry tool under the adhered component.
[* icon_note] It may help to gently wiggle or twist the card as you go. If you're separating a battery, be careful not to deform or puncture it.
[* black] If you're struggling, apply a few more drops of adhesive remover and wait about a minute before trying again.
[* black] If your device has an especially tight fit and you have trouble inserting a tool, try working a piece of floss or wire underneath the component, and pull it side-to-side in a sawing motion to separate the adhesive.
[* black] Lift and separate your newly-unglued component.

Изображение 3

Старая версия

Новая версия