Перейти к основному содержанию

Изменения к шагу №14

Отредактированно eduncan911 -

Правка отклонена автор Andrew Optimus Goldheart

Без изменений

Шаг Линий

[* black] Remove two T5 Torx, one holding the main logic board near the batter and the other holding the headphone jack in place.
[* black] The battery is glued to the chassis. Use care in prying the battery out.
[* black] Logic board comes out!
[* black] Like the iPod touch, the Zune has a soldered battery. The battery should be easier to replace than on the new iPod touch, since the Zune's battery has individual wires for the battery leads. In the touch, the battery leads run through a single ribbon cable, making hand-soldering a challenge.