Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* blackunderneath.
[* red] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the adhesive.
[title] Soften* black] Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the iPod for about a minute in order to soften up the adhesive with hair dryer
[* blackunderneath.
[* red] The bottom of the screen (near the home button) is held in place with strong adhesive.
[* black] Use a heat gun or hair dryer (low setting) to soften the adhesive.
[* black] As you start prying the screen off in the next stages, you may need to apply more heat to keep the glue warm and flexible.

Изображение 1

Старая версия

Новая версия

Изображение 2

Нет предыдущего изображения

Добавлено