Возврат к шагу #10
Отредактированно Tarun Thiruma -
Правка одобрена автор Tarun Thiruma
- До
- После
- Без изменений
Шаг Линий
| [* red] Remove the 1.9 mm Phillips screw that secures the battery power connector. | |
| - | [* black] To disconnect the battery, slide one prong of a Battery Blocker under the battery power connector to ensure the power circuit is interrupted. |
| + | [* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side. |
| + | [* black] To disconnect the battery, slide one prong of a Battery Blocker under the battery power connector to ensure the power circuit is interrupted. |