Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #19

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.
[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.

Изображение 1

Старая версия

Новая версия

Изображение 2

Удален

Изображение 3

Удален