Skip to main content

Changes to Step #1

Edit by Luke Soules

На одобрении

Deleted
Added
Unchanged

Step Lines

[* red] RemoveUse a 1.5mm hex screwdriver to remove the two hex-headhex screws from the left and right edgeson either side of the display (four screws total).
[* icon_note] AIf you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver works just fine for removing thesescrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.
[* red] RemoveUse a 1.5mm hex screwdriver to remove the two hex-headhex screws from the left and right edgeson either side of the display (four screws total).
[* icon_note] AIf you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver works just fine for removing thesescrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.