Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* icon_note] The following four steps show how to pry the rear case from the plastic frame.
-[* red] Strong clips hold the rear case in place against the frame.
+[* red] Strong clips hold the frame against the rear case.
[* icon_caution] Note the two different seams around the perimeter of the phone:
[* orange] Display panel seam. ***Do not pry*** at this seam, or you will separate and damage the display panel.
[* yellow] Frame seam. This seam lies underneath the plastic frame. ***Pry at this layer only***.