Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

+[* icon_note] ***If you are only replacing the rear-facing camera, skip the next three steps.*** You do not need to remove the back cover.
[* red] Remove the 2.6 mm Phillips screw holding the cable bracket above the battery in place.
[* black] Lift up and remove the cable bracket.
[* icon_reminder] To reinstall the bracket, [https://d3nevzfk7ii3be.cloudfront.net/igi/uTTRRbqM41mwnhMH.full|position one end into place|new_window=true], and bend the bracket slightly to spring the other end into place.