Перейти к основному содержанию

Изменения к шагу №1

Отредактированно lmac -

Правка одобрена автор lmac

Удален
Добавлено
Без изменений

Шаг Линий

[* black] PryGently pry open the case with a small flat edged tool, beginning from a top cornercorner, working your way towards the bottom.
[* black] PryGently pry open the case with a small flat edged tool, beginning from a top cornercorner, working your way towards the bottom.
[* black] Remove the 6 silver screws (circled in red).
[* black] Remove the 11 black screws (circled in yellow).
[* black] Pop up the ribbon cable (shown in blue) that connects the screen to the board, shown between the two bottom right screwsboard.
[* black] Pop up the ribbon cable (shown in blue) that connects the screen to the board, shown between the two bottom right screwsboard.
[* black] Gently lift out the board. The screen remains with the case.
[* black] Replace the clearly broken screen with a good one.
[* black] Reassemble by reversing the steps above.

Изображение 1

Старая версия

Новая версия

Изображение 3

Нет предыдущего изображения

Добавлено