Перейти к основному содержанию

Изменения к шагу №1

Отредактированно lmac -

Правка одобрена автор lmac

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Pry open the case with a small flat edged tool, beginning from a top corner.
[* black] Remove the 6 silver screws (circled in red).
[* black] Remove the 11 black screws (circled in yellow).
[* black] LiftPop up the boardribbon cable that connects the screen to the board, shown between the two bottom right screws.
[* black] Gently lift
out starting from the top edgeboard. The screen remains with the case.
[* black] Replace the clearly broken screen with a good one.
[* black] Reassemble by reversing the steps above
.
[* black] LiftPop up the boardribbon cable that connects the screen to the board, shown between the two bottom right screws.
[* black] Gently lift
out starting from the top edgeboard. The screen remains with the case.
[* black] Replace the clearly broken screen with a good one.
[* black] Reassemble by reversing the steps above
.