Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] To remove the back cover, gently pry open the edge of the case with a small flat edged tool, beginning from a top corner, working your way towards the bottom in both directions.
[* blackred] Remove the 6 silver screws (circled in red)screws.
[* blackyellow] Remove the 11 black screws (circled in yellow)screws.
[* blackblue] Pop up the ribbon cable (boxed in blue) that connects the screen to the board.
[* blackred] Remove the 6 silver screws (circled in red)screws.
[* blackyellow] Remove the 11 black screws (circled in yellow)screws.
[* blackblue] Pop up the ribbon cable (boxed in blue) that connects the screen to the board.
[* black] Gently lift out the board. The screen remains with the case.
[* black] Replace the clearly broken screen with a good one.