Меню

Your Settings

Changes to Step #1

Edit by Brett Hartt —

Правка одобрена автор Brett Hartt

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
[* black] PlaceFollow the iOpener heating instructions described in the microwave and microwave it for '''one minute''' oniOpener heating section at the highest power settingbeginning of this guide.
[* black] PlaceFollow the iOpener heating instructions described in the microwave and microwave it for '''one minute''' oniOpener heating section at the highest power settingbeginning of this guide.
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
[* icon_reminder] Place the iOpener over the front facing camera on the front edge of the top of the display.