История iPad Pro 10.5" Home Button Replacement Шага #3

Возврат к шагу #3

Отредактированно Jeff Suovanen - 10 апр 2019 г.

Правка одобрена автор Jeff Suovanen

-	[* black] Use ~~a pair of~~ tweezers to pull the flex cable ~~of the finger print sensor~~ out of the ZIF connector.
+	[* black] Use tweezers to pull the home button flex cable straight out of the ZIF connector.
	[* black] Gently peel the flex cable off the home button cover and fold it a little bit upwards.
-	[* icon_caution] If needed, apply ~~a little~~ heat ~~from an iOpener, hair dryer, or heat gun~~ to soften the adhesive under the flex cable and make it easier to remove safely. The cable is very fragile. If it gets damaged, or if the home button has to be replaced, Touch ID will no longer function.
+	[* icon_caution] If needed, apply more heat to soften the adhesive under the flex cable and make it easier to remove safely. The cable is very fragile. If it gets damaged, or if the home button has to be replaced, Touch ID will no longer function.