Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Ted Reinders -

Правка одобрена автор Ted Reinders

До
После
Без изменений

Шаг Линий

[* black] Remove the face-plate from the light switch by unscrewing the two 7.9mm #6 oval head slotted screws with the 3/16" slotted screwdriver until the plate comes away freely.
[* black] Remove the face-plate from the light switch by unscrewing the two 7.9mm #6 oval head slotted screws with the 3/16" slotted screwdriver until the plate comes away freely.
[* icon_note] Optional: Touch the voltage detector to the screws holding the wires to the sides of the light switch to test for voltage.
[* black] Flip light switch on and off to ensure no electricity is flowing through the switch.
[* icon_caution] Even though power is not flowing, be careful touching bare wire and test accordingly with the voltage detector.