Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью jessabethany -

Правка отклонена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* icon_note] Small pieces of foam tape cover the top and bottom right-hand screws securing the LCD to the rear case.
-[* black] Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw.
+[* black] Use tweezers to peel up and remove the rectangular piece of foam tape covering the top right LCD screw. Alternatively, engage the screwhead right through the tape---this makes the tape easy to transfer back on reassembly.
[* black] Remove the triangular tape covering the lower right LCD screw.