Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #11

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereStarting at the top of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.
[* icon_note] The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.
[* icon_caution] If inserting the spudger causes the corner to bend up, repeat the steps with the guitar pick to further loosen the adhesive
.
[* black] Insert wisdom hereStarting at the top of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.
[* icon_note] The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.
[* icon_caution] If inserting the spudger causes the corner to bend up, repeat the steps with the guitar pick to further loosen the adhesive
.