Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Swing the display open slightly, but keep the MacBook pro upside-down. The trackpad assembly should separate and lay flat on the display.
+[* black] Gently feed the trackpad's ribbon cable through its slot in the chassis.
+[* icon_reminder] Carefully note the correct slot for the trackpad cable during reassembly—it goes through the narrow slot alongside the battery, not the bigger slot near the MacBook Pro's front edge.