Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use a plastic opening tool to pry the LCD connector from its socket on the logic board.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.