Перейти к основному содержанию

Изменения к шагу №4

Отредактированно Ben Eisenman -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* red] RemoveIf you have a Core Duo machine, refer to picture 1 and remove three Phillips screws connecting the clutch assembly to the lower edge of the front display bezel near the display data cable.
[* orange] If you have a Core 2 Duo Model A1211 machine, refer to picture 2 and remove two
Phillips screws connecting the clutch assembly to the lower edge of the front display bezel near the display data cable.
[* red] RemoveIf you have a Core Duo machine, refer to picture 1 and remove three Phillips screws connecting the clutch assembly to the lower edge of the front display bezel near the display data cable.
[* orange] If you have a Core 2 Duo Model A1211 machine, refer to picture 2 and remove two
Phillips screws connecting the clutch assembly to the lower edge of the front display bezel near the display data cable.

Изображение 1

Старая версия

Новая версия

Изображение 2

Нет предыдущего изображения

Добавлено