Перейти к основному содержанию

Возврат к шагу #26

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Peel up (but don't remove) the two rubber vibration damping strips from the adhesive holding them to the fans.
- [* black] If needed, apply mild heat from an iOpener, hair dryer, or heat gun to soften the adhesive and make the dampers easier to separate.
+ [* black] If needed, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive and make the dampers easier to separate.