Перейти к основному содержанию

Изменения в этом шаге

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

+[title] Display Assembly
+[* icon_note] Strong adhesive holds the screen in place. In order to separate it, you'll first need to heat and soften the adhesive using an iOpener, hair dryer, or heat gun.
+ [* black] You may need to reapply heat repeatedly throughout this process to prevent the adhesive from cooling and hardening.
+[* black] [guide|25705|Prepare an iOpener|new_window=true] and place it on the bottom edge of the iPad's screen for about two minutes.

Изображение 1

Нет предыдущего изображения

Добавлено

Изображение 2

Нет предыдущего изображения

Добавлено