Изменения в этом шаге
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Place a suction cup next to the iPad's home button and press down to create a seal. |
|---|---|
| + | [* icon_note] To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display. |
| + | [* black] Firmly pull up on the suction cup to to create a small gap between the front panel and the rear case. |
| + | [* icon_caution] Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive. |
| + | [* icon_note] If your iPad's screen is badly cracked, covering it with a smooth layer of clear packing tape may help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and [https://d3nevzfk7ii3be.cloudfront.net/igi/NgVMfmOgJwEalMFF.huge|fold it into a handle|new_window=true]. |
| + | [* black] Once you've opened a sufficient gap, insert an opening pick into the gap. |
Изображение 1
Нет предыдущего изображения
Добавлено