Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Gaetan -

Правка одобрена автор Gaetan

До
После
Без изменений

Шаг Линий

[* black] Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB.
-[* black] Use a spudger to slide the conector attachment black part and release the ribbon from the PCB.
+[* black] Use a [product|IF145-002|Spudger] to slide the connector attachment black part and release the ribbon from the PCB.
[* black] Now you can remove the keyboard.