Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Remove all traces of adhesive and debris from the frame. Clean the adhesion surface with high concentration isopropyl alcohol (over 90%) and wipe it clean with a lint-free cloth.
[* icon_caution] If glue or glass remnants are left behind, the new display will not mount correctly and may be damaged.
[* black] Lay the adhesive strips out to get an idea of where they go.
-[* black] Peel off the ***clear plastic backing*** from the pre-cut adhesive strip, exposing one side of adhesive.
+[* black] Peel off the ***clear plastic backing*** from the large pre-cut adhesive strip, exposing one side of adhesive.