Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Carefully line up a long edge of the adhesive with the edge of the phone frame.
+[* icon_note] Make sure that the [https://d3nevzfk7ii3be.cloudfront.net/igi/PlBTKL3Wm4QVDsWl.full|adhesive cutouts match the phone|new_window=true], and that the camera and sensors are not covered by adhesive.
+[* black] Lay the adhesive down lightly on the frame.
+ [* black] If it is not properly aligned, carefully peel the adhesive back up.
+[* black] Once the adhesive is aligned, use your fingers to press the adhesive onto the frame.