Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

-[* black] Carefully peel one of the end adhesive strips from the clear plastic backing.
+[* black] Peel one of the end adhesive strips from the clear plastic backing.
[* black] Hold the strip by the two green end tabs and line the adhesive strip with the phone frame.
[* black] Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned.
[* black] Once aligned, use your fingers to press the adhesive into place.
[* black] Repeat the procedure for the remaining adhesive strip.