Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

Без изменений

Шаг Линий

[* black] Peel one of the end adhesive strips from the clear plastic backing.
+ [* icon_note] The strips are cut for a specific end and are not interchangeable.
[* black] Hold the strip by the two green end tabs and line the adhesive strip with the phone frame.
[* black] Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned.
[* black] Once aligned, use your fingers to press the adhesive into place.
[* black] Repeat the procedure for the remaining adhesive strip.