Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

-[* black] Continue with your device re-assembly until you are ready to seal the phone up.
-[* icon_note] Make sure to test your phone's functionality before sealing it up.
+[* black] Continue with your device re-assembly until you are ready to attach the screen.
+[* icon_note] If possible, test your screen's functionality before sticking it in place.
[* black] Peel and remove the green plastic liner from all adhesive strips to expose the screen-facing adhesive.
[* black] Align and set the phone screen on top of the adhesive.
[* black] Use your fingers to squeeze around the perimeter of the phone to set the adhesive.
[* black] Apply a few books worth of weight on top of the screen for an hour to help the adhesive bond.