Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Taylor Dixon -

Правка одобрена автор Taylor Dixon

Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Place the flat end of an opening tool against the lower edge of the inside of the phone, as shown in the first photo.
+[* black] Carefully press upward with the opening tool to create a gap between the display and the chassis.
+ [* icon_note] Separating the adhesive to create the initial gap may require some force. If you are unable to perform this step, reheat the lower edge of the phone to soften the adhesive and try again.