Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Taylor Dixon -

Правка одобрена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

[* icon_note] This step shows how to insert the pick without damaging the LCD panel. Do this before you slice either long edges of the phone.
[* black] With the pick 1 mm in the gap, pivot the pick upwards to a steep angle.
-[* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in ***below the LCD panel.***
+[* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in ***below the OLED panel.***
[* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the LCD panel. Angle the pick and try again.