Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

-[* icon_note] This step shows how to insert the pick without damaging the LCD panel. Do this before you slice either long edges of the phone.
+[* icon_note] This step shows how to insert the pick without damaging the OLED panel. Do this before you slice either long edges of the phone.
[* black] With the pick 1 mm in the gap, pivot the pick upwards to a steep angle.
[* black] At this angle, carefully push the pick into the gap about 1/4" (6 mm). The pick should slide in ***below the OLED panel.***
- [* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the LCD panel. Angle the pick and try again.
+ [* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the OLED panel. Angle the pick and try again.