Skip to main content

Changes to Step #1

Edit by Andrew Optimus Goldheart

На одобрении

Deleted
Added
Unchanged

Step Lines

[* black] With the back cover off and the battery removed, the hard drive is clearly visible.
[* yellow] There are four 4.2 mm screws securing the hard drive to the logic board.
[* blackyellow] Remove each screw withall four using a Phillips #00 screwdriver.
[* blackyellow] Remove each screw withall four using a Phillips #00 screwdriver.
[* icon_caution] Don't lose any of screws! You may want to use a magnetized screw driver.