Перейти к основному содержанию

Changes to Step #4

Edit by Christopher Wright

Правка одобрена автор Christopher Wright

Удален
Добавлено
Без изменений

Шаг Линий

[* blue] The hard drive ribbon cable is held in place by a black latch on the hard drive.
[* green] Using a small flat head screwdriver, flip the black latch up 90 degrees.
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white partconnector piece.
[* icon_note] This may be a little difficult to move, so take your time and go easybe careful.
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white partconnector piece.
[* icon_note] This may be a little difficult to move, so take your time and go easybe careful.