Skip to main content

Changes to Step #4

Edit by Adrian Szydlowski

Правка одобрена by Adrian Szydlowski

Deleted
Added
Unchanged

Step Lines

[* icon_note] This may be difficult to move, so take your time and be careful.
[* bluered] The ribbon cable is held in place by a black latch on the hard drive.
[* greenorange] Using a small flat head screwdriver, flip the black latch up 90 degrees.
[* bluered] The ribbon cable is held in place by a black latch on the hard drive.
[* greenorange] Using a small flat head screwdriver, flip the black latch up 90 degrees.
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white connector piece.