Возврат к шагу #26
Отредактированно Gregg Ferry -
Правка одобрена автор Gregg Ferry
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Solder + “c. Battery”, - “d. Battery” and thin blue wire Cut the leads of the battery wires to about 3cm , strip about ½ cm, twist together and tin.. Make a U in this joint and in the blue wire, loop U’s together, crimp with needle nose pliers, solder joint. Slip heat shrink over solder joint and shrink 040 |
|---|