Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereUse a Y000 driver to remove the 1.1 mm screws securing the LCD shield:
[* red] Three screws on the side nearest the display cables
[* orange] Two more screws on the opposite side
[* icon_note] Press your driver firmly into the screw while turning it. If needed, you can use your spudger to brace each screw from behind, in order to apply more pressure to the screws without bending the shield
.
[* black] Insert wisdom hereUse a Y000 driver to remove the 1.1 mm screws securing the LCD shield:
[* red] Three screws on the side nearest the display cables
[* orange] Two more screws on the opposite side
[* icon_note] Press your driver firmly into the screw while turning it. If needed, you can use your spudger to brace each screw from behind, in order to apply more pressure to the screws without bending the shield
.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия