Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Not satisfied with justmerely removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and tear down even more.
[* black] Not satisfied with justmerely removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and tear down even more.
[* black] Starting with the top module:
[* black] The 8 MP ƒ2.0 frontselfie camera and earpiece speaker are both removable.
[* black] The 8 MP ƒ2.0 frontselfie camera and earpiece speaker are both removable.
[* black] The headphone jack as well as the proximity and ambient light sensors are soldered onto the breakout board.
[* black] The camera module carries a modular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board.
[* black] The bottom module contains the vibration motor, and a soldered-on USB-C port and microphone.
[* black] The loudspeaker module is the loneliest of the modulesbits clinging onto the bottom module with its two contacts.
[* black] The loudspeaker module is the loneliest of the modulesbits clinging onto the bottom module with its two contacts.