Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Erin Beane -

Правка одобрена автор Erin Beane

До
После
Без изменений

Шаг Линий

[* red] With the stand open, we are ready to start. The stand is attached to the tablet with 2 Torx screws located on the left and right sides and a lever in the middle. Using a T5 Torx screwdriver, remove these screws.
[* red] With the stand open, we are ready to start. The stand is attached to the tablet with 2 Torx screws located on the left and right sides and a lever in the middle. Using a T5 Torx screwdriver, remove these screws.
[* orange] With the screws removed, the stand is now detachable from the tablet.
[* yellow] The lever can be released with some simple wiggling. The stand is now free.