Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Kevin Hua -

Правка одобрена автор Kevin Hua

До
После
Без изменений

Шаг Линий

[* red] Now you will removeblack] Remove the plastic casecasing covering thethe camera. The plastic case hasUse a spudger to release the small bezels, plastic snap-in piecesbezels.
[* orange] Remove the plastic casing using a spudger.icon_note] Be patient; you will have to work around the casing because there are several small bezels along the casing.
[* icon_caution] Use caution removing the back cover because it is still connected to the motherboard by a ribbon cable. Use the spudger to safely detach the ribbon cable.
[* red] Now you will removeblack] Remove the plastic casecasing covering thethe camera. The plastic case hasUse a spudger to release the small bezels, plastic snap-in piecesbezels.
[* orange] Remove the plastic casing using a spudger.icon_note] Be patient; you will have to work around the casing because there are several small bezels along the casing.
[* icon_caution] Use caution removing the back cover because it is still connected to the motherboard by a ribbon cable. Use the spudger to safely detach the ribbon cable.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия