Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Kevin Hua -

Правка одобрена автор Kevin Hua

До
После
Без изменений

Шаг Линий

[* icon_note] The battery is glued to the back cover but can be easily removed with a spudger
[* black] Gently slide the spudger underneath one side of the battery and work it back and forth around all sides until the battery comes off the back cover.
[* icon_note] When reassemblingreassembly the back cover totouch and test the motherboard, reinsertingadhesiveness before attaching the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into placebattery pack. Add double sided tape if needed.
[* icon_note] When reassemblingreassembly the back cover totouch and test the motherboard, reinsertingadhesiveness before attaching the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into placebattery pack. Add double sided tape if needed.

Изображение 3

Удален