Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Kevin Hua -

Правка одобрена автор Kevin Hua

До
После
Без изменений

Шаг Линий

[* icon_caution] Once the back-plate is completely loose from the main system, do not pull the two apart.
[* red] A ribbon connects the battery on the back-plate to the motherboard, therefore slowly lift the bottom of the back-plate up until you can see the ribbon.
[* black]
Use the spudger to push and remove the ribbon.
[* orangeblack] Separate the back-plate from the main system.
[* red] A ribbon connects the battery on the back-plate to the motherboard, therefore slowly lift the bottom of the back-plate up until you can see the ribbon.
[* black]
Use the spudger to push and remove the ribbon.
[* orangeblack] Separate the back-plate from the main system.