Перейти к основному содержанию

Changes to Step #1

Edit by Jesus Perez

Правка одобрена автор Jesus Perez

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Having the plastic opening tool in hand, you can now start to removeicon_caution] Do not pry from the screen portionside because doing so will damage the interior of your kindle from the restscreen and it's components.
[* icon_caution] You will be pryingPry each side equally so that your Kindle does not bend in the process.
[* red] Pry
the screen half of your kindle from the back half by using the medium plastic opening tool '''on the back''' of your kindle (not on the same side as the screen) as shown in the step 1 images.
[* red] A good place to start prying is
and starting near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of your kindlejack as shown.
[* icon_noteblue] For most effective prying, have the arrow on the underside of the plastic opening tool be closer tofacing the back side of the kindle than to the screenKindle.
[* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separateicon_note] Once the two halves of your kindle. Repeat this several times until youhalve are able to see a noticeable gap betweenseparated, leave the halves.
[* icon_note] Pry each side equally so that your kindle does not bend in the process.
[* black] As the gap between the halves of your kindle continue to grow, repeat the above step further along the sides until you are able to completely separate the screen half from the other.
[* icon_note] Before pulling the two halves apart, proceed to step 2 to successfully detach them from one another
flex cables attached.
[* black] Having the plastic opening tool in hand, you can now start to removeicon_caution] Do not pry from the screen portionside because doing so will damage the interior of your kindle from the restscreen and it's components.
[* icon_caution] You will be pryingPry each side equally so that your Kindle does not bend in the process.
[* red] Pry
the screen half of your kindle from the back half by using the medium plastic opening tool '''on the back''' of your kindle (not on the same side as the screen) as shown in the step 1 images.
[* red] A good place to start prying is
and starting near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of your kindlejack as shown.
[* icon_noteblue] For most effective prying, have the arrow on the underside of the plastic opening tool be closer tofacing the back side of the kindle than to the screenKindle.
[* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separateicon_note] Once the two halves of your kindle. Repeat this several times until youhalve are able to see a noticeable gap betweenseparated, leave the halves.
[* icon_note] Pry each side equally so that your kindle does not bend in the process.
[* black] As the gap between the halves of your kindle continue to grow, repeat the above step further along the sides until you are able to completely separate the screen half from the other.
[* icon_note] Before pulling the two halves apart, proceed to step 2 to successfully detach them from one another
flex cables attached.