Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Julian Sanchez -

Правка одобрена автор Julian Sanchez

До
После
Без изменений

Шаг Линий

[* icon_caution] When removing the ribbon cable and installing the new one take special care to not bend or fold the cable too much as this can cause damage to the cable itself.
-[* red] To access the ribbon cable connectors we must first remove the metal bracket.
+[* red] To access the ribbon cable connectors we must remove the metal bracket.
[* orange] Remove the three 2.4mm Philips #0 screws that hold the panel down.