Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Victor Sanchez Gutierrez -

Правка одобрена автор Victor Sanchez Gutierrez

До
После
Без изменений

Шаг Линий

[* icon_note] The ribbon cable connector is located underneath the sub-board. To access the connector flip the board over towards the battery.
[* light_blue] Use a spudger tool to remove the cable from the connector.
-[* icon_note] The USB Connector board can now be removed from the device.
+[* icon_note] The USB Connector board can now be removed from the device and replaced.