Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

+[title] Remove the front handle enclosure
[* icon_note] The rear half of the enclosure is bolted to the handle support, so the front half will be removed first.
[* black] Pull the front half of the enclosure straight away from the rear half to separate the enclosure.
[* icon_note] If the interlock assembly comes out with the front half of the enclosure, detach it and place it back into the rear half.
[* black] Remove the front half of the handle enclosure.