Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

-[* black] Pull the wires connected to the interlock assembly straight out of their connectors.
- [* icon_note] ***Reassembly Tip:*** Make a note of where each wire connects to on the interlock assembly.
+[* black] Pull the all the wires connected to the interlock assembly straight out of their sockets to completely disconnect the interlock assembly.
+ [* icon_note] ***Reassembly Tip:*** Make a note of where each wire connects to the interlock assembly, and reconnect them in the same positions when you reassemble the sander.