Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Craig Lloyd -

Правка одобрена автор Craig Lloyd

До
После
Без изменений

Шаг Линий

[* black] Use a 4 mm hex key to remove the 13.8 mm-long screw securing the rear half of the handle enclosure to the handle shaft.
- [* icon_note] Make sure to keep track of the screw's washer so that you don't lose it.
+ [* icon_note] This screw has a washer. Be sure to retain it for reinstallation.